Battery Fuse for Solar/Charger System
From the new solar/charger system was planning to run 6ga + and - wires right to the battery terminals, not tied in anywhere to the existing trailer wiring. Was thinking about using a Blue Sea 519...
Forum Discussion
150A is "undersized"? Must be some serious loads there. My guess - a microwave.
Rogue 3048 accepts max #4 wire, but in his case I would use #2. Or - a short run of #4 to the Pos bus near controller or to controller breaker, and then #2 to battery.
Rogue 3048 accepts max #4 wire, but in his case I would use #2. Or - a short run of #4 to the Pos bus near controller or to controller breaker, and then #2 to battery.
