BRAKE CONTROLLER PLUG LOCATION?
We bought a 2018 Ford Explorer with factory tow package. Has class 3 hitch and 7 and 4 pin plugs. I was told my Prodigy 2 brake controller would plug right into the system with the special adaptor c...
Forum Discussion
This information is from installation instructions:
The harness for the Ford Explorer/Mercury
Mountaineer is located behind the vehicle glove
box on the Passenger side or the harness will
be located underneath and left of the steering
column, taped to another harness near the
emergency brake pedal. There will be a
6-pin connector that mates with the one
The harness for the Ford Explorer/Mercury
Mountaineer is located behind the vehicle glove
box on the Passenger side or the harness will
be located underneath and left of the steering
column, taped to another harness near the
emergency brake pedal. There will be a
6-pin connector that mates with the one
