Forum Discussion
tenbear
Aug 20, 2013Explorer
I have now restrung 4 four string blinds. All the diagrams I have seen online have one spring in the middle top. Mine have 2 springs, one on each side on the top.
I have also used the system of "welding" (described in my previous post) the new string to the old and pulling the new string thru using the old string. Of course this only works if the old string is still intact. I hadn't looked at the videos until this post and that method looks pretty good too.
So, when you take the blind apart, be sure to make a diagram of your blind. It may not be the same as shown online.
I have also used the system of "welding" (described in my previous post) the new string to the old and pulling the new string thru using the old string. Of course this only works if the old string is still intact. I hadn't looked at the videos until this post and that method looks pretty good too.
So, when you take the blind apart, be sure to make a diagram of your blind. It may not be the same as shown online.
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,253 PostsLatest Activity: May 19, 2025