Burnt wires in power distribution panel
While tracing the cause of an intermittent electrical failure in an electrical circuit in our ORV 21RBS, I discovered that all of the neutral wires in the power distribution panel were 'burnt" where t...
Forum Discussion
Transfer switches are not common in trailers and only if equipped with on-board gensets.
I would suggest coating the wires with electrical grease. The buss bars are commonly aluminum which oxidizes causing issues. de-oxidation compound lessen this.
I would suggest coating the wires with electrical grease. The buss bars are commonly aluminum which oxidizes causing issues. de-oxidation compound lessen this.
