Burnt wires in power distribution panel
While tracing the cause of an intermittent electrical failure in an electrical circuit in our ORV 21RBS, I discovered that all of the neutral wires in the power distribution panel were 'burnt" where t...
Forum Discussion
QCMan wrote:
Odds are they are all loose or were before you tightened them. Loose connections = higher resistance = high temps = burnt wires.
I will second that. I'm fond of sayinig many RVers have a few screws loose.. in fact those very screws are what I am talking about.
One of mine took over 3 FULL TURNS to tighten. I don't think they even tried at the factory.
