Burnt wires in power distribution panel
While tracing the cause of an intermittent electrical failure in an electrical circuit in our ORV 21RBS, I discovered that all of the neutral wires in the power distribution panel were 'burnt" where t...
Forum Discussion
time2roll wrote:BeeBee wrote:
Click For Full-Size Image.
So is it possible there was one loose wire and the heat moved on the bus to discolor the other wires?
It's entirely possible. Generally when that's what has happened it's pretty clear which connection was loose as that wire is the most burnt one, and the ones adjacent are the next most toasted ones, etc.
