Can't get Shurflo pump to prime
Just got my rig back from the body shop. They had to empty and pull the fresh water tank to make repairs to the utility compartment and door. I filled the tank but cannot get water to flow. Pump is a ...
Forum Discussion
Keith,
Try closing all the faucets, turn on the pump and open the faucets one at a time, hot and cold, including the outside shower if you have one. This should blead out the air in the lines and eventually water should begin to flow again. That of course assumes that your pump is still in fact pumping water.
Hope this helps.
Try closing all the faucets, turn on the pump and open the faucets one at a time, hot and cold, including the outside shower if you have one. This should blead out the air in the lines and eventually water should begin to flow again. That of course assumes that your pump is still in fact pumping water.
Hope this helps.
