The Kunkels wrote:
Let me rephrase my question. Instead of buying a separate power supply can a 12v mobile cb radio with a plug installed on the end be plugged into a travel trailer.
Again I not familiar with a con or inverter. On my Jeep I have a radio wired to the battery and beings some tt's have batteries I'm wondering if it can be done on a tt plugged in to a campground pedestal with a con/inverter.
Sorry for the confusion.
Yes, assuming the travel trailer is not very, very old or very, very simply equipped. Every travel trailer will have a 12V battery of some sort, with a 12V distribution panel, that powers all the lights, the water pump, the control circuitry for the fridge and furnace and water heater, the exhaust fans, etc. (Occasionally some appliances may have pilot ignition and not need 12V power...I'm speaking generally here.) There will also be a "converter" which is basically a built-in 12V battery charger/power supply. When connected to shore power, it charges the battery and powers all the 12V systems in the trailer.
You may not have very many lighter sockets in the travel trailer, and those that exist may not be super conveniently located. You might end up needing to install or have installed a new one (or some other connector). This is not an especially difficult or involved modification.
As was mentioned, getting a good ground plane for the antenna on a fiberglass and wood trailer can be a bit of a difficulty, limiting the antenna system.