Charger selection help please
I'm thinking about buying a Noco Genius G26000 26a smart charger for when the sun isn't getting my batteries charged. I have a FR Stealth Toyhauler with two Interstate GC2 208ah batteries. They do...
Forum Discussion
On topic exercise...
Power supply ouput cables tip. This will appear in Megawatt mods upcoming article.
Buy two lengths of Ten gauge cable. I like the silicone wire offered on eBay. Usually red/black 5 ft pairs descibed a 10' heads-up. Longer pairs are available.
This is ultra flexible ultra fine-strand tinned copper wire.
I recomnended tapping all three pos and all three neg terminals then manifolding three into one larger cable your choice.
With ANY wire to terminal board connection strip the wire. Then DIVIDE EVENLY the strands sticking out. A "Y" shaped stripped end.
This allows heavy gauge capacity and divides the load on the circuit board terminal screw. On the BORG I used SOLID 12 gauge bare conductor then manifolded the three to a 10 gauge to shunt.
SPLIT ENDS suck when talking about hair but they are the Hot-Setup for power supply terminals.
Power supply ouput cables tip. This will appear in Megawatt mods upcoming article.
Buy two lengths of Ten gauge cable. I like the silicone wire offered on eBay. Usually red/black 5 ft pairs descibed a 10' heads-up. Longer pairs are available.
This is ultra flexible ultra fine-strand tinned copper wire.
I recomnended tapping all three pos and all three neg terminals then manifolding three into one larger cable your choice.
With ANY wire to terminal board connection strip the wire. Then DIVIDE EVENLY the strands sticking out. A "Y" shaped stripped end.
This allows heavy gauge capacity and divides the load on the circuit board terminal screw. On the BORG I used SOLID 12 gauge bare conductor then manifolded the three to a 10 gauge to shunt.
SPLIT ENDS suck when talking about hair but they are the Hot-Setup for power supply terminals.
