Charging a Battery Bank
I am planning on upgrading my batteries to 4 6v batteries wired in series and parallel to have a 12v system with plenty of Amp Hours. There is a ton of information on how to wire things up but nothing...
Forum Discussion
Joel_T wrote:
I'm gonna go see what I can take apart so's I can drill a bigger hole for the switch....th pots hole's OK. Where the charger's at now I'm now unsure which way the switch is ??
Yes, you need to take the lid off (four screws) and look at the switch and see how big of a hole you need so you can operate it.
I am confused about you not having the LED lamp (lit when 120v power is on) AND you have the switch as well as the pot. I am getting more on that.
OK--it seems if you have an LK then you must have that lamp AND it has two holes and the switch will make it a three stage OR a single stage, which is worked by the pot. Please confirm exactly what it says on the label for the model type. and look again for a little lamp maybe by the three fuses? A photo or two would be great too!
