Charging a Battery Bank
I am planning on upgrading my batteries to 4 6v batteries wired in series and parallel to have a 12v system with plenty of Amp Hours. There is a ton of information on how to wire things up but nothing...
Forum Discussion
Red31 those specs make more sense. Don't understand the value of or why the other specs.
BFL13 The Crown specs I have are several years old. (Can't find newer other than Crowns generic that Red31 found.) I've read that some mfg's are increasing their Vabs from the "old" typical 14.4 to 14.8 or in the 15s. I'd probably ignore the 14.22v suggestion.
My batts SG is still 1.125- and the WFCO is trickle charging only at 13.6v with 1a in. At this rate 100% SOC is 2 weeks out or maybe never at this point. Might later try 14.8 from the PowerMax.
BFL13 The Crown specs I have are several years old. (Can't find newer other than Crowns generic that Red31 found.) I've read that some mfg's are increasing their Vabs from the "old" typical 14.4 to 14.8 or in the 15s. I'd probably ignore the 14.22v suggestion.
My batts SG is still 1.125- and the WFCO is trickle charging only at 13.6v with 1a in. At this rate 100% SOC is 2 weeks out or maybe never at this point. Might later try 14.8 from the PowerMax.
