Class T fuses for inverters
I was reading my Samlex inverter manual and found a requirement for a Class T fuse between it and the battery bank. After further reading it seems this is a common recomended safety practice for in...
Forum Discussion
2/0 is good at 330 amps by my chart. Your inverter is capable of pulling 200 maybe a little more. Max draw is probably the microwave at 140 to 170 amps.
I would go 200 max on a class T fuse. Working range is easy 125% to 150% of rating.
https://www.bluesea.com/products/5116/Fuse_A3T___Class_T_200_Amp
You are protecting the wire from a dead short. Not protecting the inverter. Plenty of room for surge performance.
http://www.genuinedealz.com/custom-cables?size=48
I would go 200 max on a class T fuse. Working range is easy 125% to 150% of rating.
https://www.bluesea.com/products/5116/Fuse_A3T___Class_T_200_Amp
You are protecting the wire from a dead short. Not protecting the inverter. Plenty of room for surge performance.
http://www.genuinedealz.com/custom-cables?size=48
