Converter/Charger
I'm trying to get a handle on how to properly charge my two new Trojan T-105's. I'm replacing two Deka Intimidator AGM,s that are 7 years old. Trojan recommends a Staged charger, with specific voltage...
Forum Discussion
3Lakes Steve wrote:
Getting ready to mount the new converter, I have a spot about 4'from the battery bank that I think would work, and better than the current location of 20'.
My thought was to run new 2 awg to the batteries, and leave the existing cables to the old converter in place. I would just unplug it and leave as a backup?
My Trojan batteries have a stud on top, but don't think it's tall enough for 3 lugs. Any Ideas?
The converter will be in living room, in a small table/cabinet above the battery bay. Do you think fan noise will be a problem?
Thanks, Steve
You can use a bus bar when running out of battery post height. Run the bus bar to the battery post and attach the other wires to the bus bar terminals.
Yes, the existing wire from battery to DC fuse panel will also work for your deck mounted converter near the batteries to reach the DC fuse panel
