Copper sleeve?
If you have a 1/0 copper cable, then swaged a dead soft copper sleeve reducer over/onto to this 1/0 copper cable to fit a #2 awg sized cable fitting, would the resistance be higher or lower? Tia, ...
Forum Discussion
Jhilley,
Thank you for this info, I did not know they made this type of connector.
I had planned on using my lathe and turning dead soft copper bar into this same type of connector and then using the 16 ton crimper to attach it to the cable etc.
Tia,
Don
Thank you for this info, I did not know they made this type of connector.
I had planned on using my lathe and turning dead soft copper bar into this same type of connector and then using the 16 ton crimper to attach it to the cable etc.
Tia,
Don
jhilley wrote:
What you need is a Reducing Cable Connector
Greaves Cable Reducing Connector
