Copper sleeve?
If you have a 1/0 copper cable, then swaged a dead soft copper sleeve reducer over/onto to this 1/0 copper cable to fit a #2 awg sized cable fitting, would the resistance be higher or lower? Tia, ...
Forum Discussion
Ozlander,
I think, I would have to clip off more than a few strands, as the intended copper cable I plan on using has 5145 strands of tin coated copper cable. ;)
I know, I'll have several bends to make from the battery box area to the CC, and this cable seems to be extra flexible etc.
See info here,
http://www.ebay.com/itm/KnuKonceptz-Kolossus-Flex-1-0-Gauge-Black-OFC-Power-Wire-5145-Strands-Copper-/390411845091?pt=US_Car_Audio_Power_Speaker_Wire&hash=item5ae65bfde3#ht_1444wt_1153
Tia,
Don
I think, I would have to clip off more than a few strands, as the intended copper cable I plan on using has 5145 strands of tin coated copper cable. ;)
I know, I'll have several bends to make from the battery box area to the CC, and this cable seems to be extra flexible etc.
See info here,
http://www.ebay.com/itm/KnuKonceptz-Kolossus-Flex-1-0-Gauge-Black-OFC-Power-Wire-5145-Strands-Copper-/390411845091?pt=US_Car_Audio_Power_Speaker_Wire&hash=item5ae65bfde3#ht_1444wt_1153
Tia,
Don
Ozlander wrote:
Me, I'd just clip a few strands off the 1/0 cable so that it would fit the #2 cable fitting. KISS and two less joints. Would probably end up being larger than a #2 cable.
