Daly BMS gone crazy..Update Opinions
I was charging my 120ah lifepo4 battery yesterday and came in for lunch and saw it shut down..I figured it hit the 3.65 volt cell limit and shut down,I went out to check it and saw this on the Blueto...
Forum Discussion
BFL13 wrote:full_mosey wrote:BFL13 wrote:
With the BMS reading cell voltage and getting the SOC from that, how can it tell when the cell voltage is a lower loaded voltage and the SOC is actually higher? The AH counter doesn't get fooled by that.
The BMS is not a battery charger.
Do you have a battery charger that knows the SOC of your batteries?
HTH;
John
I was asking about how the Smart BMS can monitor SOC when it has loaded voltages to work with. I know know it is not a charger :)
Instead of asking us goobers and not getting the exact answer to help you justify I told you so your getting ripped of by the sales pitch. Why not email the manufacturer you have a beef with and then come back and teach us your new findings on how they get their results.
We who own and use them seem content with being bamboozled.
