Forum Discussion
MEXICOWANDERER
Aug 14, 2013Explorer
Honorable Chinese need to design MOTORIZED switch. Press a button, common bar moves down upon two contacts and the circuit is made. Motor shuts off. Zero drain. STRONG spring used to maintain contact but motor easily lefts common bar up and off the two contacts. Too simple.
An RV is NOT a boat in which the bilge pumps bypass the master ON/OFF switch. When the master cutoff switches (the 2nd for the engine if the ECU can tolerate it) are opened ZERO meaning .000 milliamperes can pass through the switch.
THUNDERSTORM
"Honey, run and press that switch!"
"But it only disconnects some of the stuff in the house"
"Well the home builder put it in for a reason"
"Ya mean I gotta get out of my Lazy Boy and go all the way to the garage? (!)"
An RV is NOT a boat in which the bilge pumps bypass the master ON/OFF switch. When the master cutoff switches (the 2nd for the engine if the ECU can tolerate it) are opened ZERO meaning .000 milliamperes can pass through the switch.
THUNDERSTORM
"Honey, run and press that switch!"
"But it only disconnects some of the stuff in the house"
"Well the home builder put it in for a reason"
"Ya mean I gotta get out of my Lazy Boy and go all the way to the garage? (!)"
About Technical Issues
Having RV issues? Connect with others who have been in your shoes.24,203 PostsLatest Activity: Feb 21, 2025