DC Voltage Readout or Bad Voltage
I have an 04 Winnebago Ultimate Freedom Diesel pusher. When I look at the voltage readout on the inside wall, it starts out at 11+ volts. I turn on some lights and the reading rapidly drops, and so...
Forum Discussion
Here is a summary so far:
Voltage on panel readout and battery voltage do NOT agree. Battery stays full voltage. So problem is downstream of batteries?
With disconnect switch off (disconnected), panel reads 0. Disconnect solenoid works. Problem is between disconnect solenoid and panel, which could be anywhere in the 12 Volt system? Comments?
Ran out of time. Will make more checks tomorrow.
Thanks for all the replies so far.
Voltage on panel readout and battery voltage do NOT agree. Battery stays full voltage. So problem is downstream of batteries?
With disconnect switch off (disconnected), panel reads 0. Disconnect solenoid works. Problem is between disconnect solenoid and panel, which could be anywhere in the 12 Volt system? Comments?
Ran out of time. Will make more checks tomorrow.
Thanks for all the replies so far.
