debris in grey tank
recently took the tt for a check up as the grey tank sensor was showing one third full, when indeed it's empty. the service manager said that it may need a power flush. sooooo my question is how can i do this on my own?
Forum Discussion
11 Replies
- First off, sensors RARELY work correctly. If you drain them and the water comes out, you are set. If you want to try to clean the sensors, you can buy some sensor cleaner where they sell the toilet treatment stuff. Otherwise, put a bit of bleach and some clothes detergent in and drive it around with a full tank of grey water. Drain. Search here for sensors not working or words similar and you will see many others have this same problem.
