Deka Intimidator Batteries?
I was going to purchase some Fullriver DC250-6 AGMs for my project but I've been told that every DC250-6 battery in the US was purchased for a large order being shipped overseas and it will be at leas...
Forum Discussion
pianotuna wrote:
Hi Chris,
3 12 volt jars can only be wired in a balanced manner using method #3 at the smartgauge site.
...
I'm basically using method 2 there- but I'm not seeing how that is unbalanced- they give .0015 ohms per link, and if you add up the number of jumpers, current to each battery travels through the exact same number. Now if there is a difference in resistance in the hot leg and ground, that could do it, but I believe current will always be the same, irregardless as to where the added resistance is.
I do firmly believe in balancing the batteries- the diagram I used to use on this bank was not nearly as good- single hot and ground hookup to the entire 9 battery bank- now I do three hookups to the three banks.
While it would be nice to"star" all 9, there simply isn't room.
