DeOxIT D100L An Opinion
DeOxIT uses a code for its labeling that I don't particularly care for. It's products that contain 100% of the product's active ingredient include the number 100 on the label. This is true of the r...
Forum Discussion
Copper wire can be soldered to aluminum bus bar for a permanent very low resistance connection.
Sand clean the aluminum surface.
Tin the busbar with a thin film of fluxless low temperature aluminum solder.
Melt a thick layer of 60/40 solder into the molten aluminum solder.
Fan the copper strands out to cover the prepared area and tin them.
Reheat the busbar and melt the copper wire into the prepared surface.
Sand clean the aluminum surface.
Tin the busbar with a thin film of fluxless low temperature aluminum solder.
Melt a thick layer of 60/40 solder into the molten aluminum solder.
Fan the copper strands out to cover the prepared area and tin them.
Reheat the busbar and melt the copper wire into the prepared surface.
