DIY 3 way refrigerator venting (drawing)
I'm working on my DIY conversion build out of a 2010 Ford extended E250. I've red a lot of articles here and there about 3 way refrigerator venting, now I can't do the big two gravity vents/access ...
Forum Discussion
It looks like the back of the fridge is too far from the wall. The installation instructions want the back of the fridge within something like 1/2 to 1" (check instructions). Otherwise the flow of air may go around the tubes rather than through them.
Also, since the top vent has to go around a corner, I would add a fan.
Also, since the top vent has to go around a corner, I would add a fan.
