StanZZZ wrote:
One more thing. The stat reset. I have two stats and I have done the reset several times to each unit.
You have 2(two) 5 button CCC tstats? WHY? Doug
PS, I misunderstood your Yellow wire. It is NOT to be connected to the Board. It is capped off. IF connected and NO Heat Pump, then it feeds back to the fan motor wiring and will cause your overheat/malfunction. THAT connection may have fouled up the HP reading from the board to the wall tstat. IF, after disconnecting and a reset does NOT remove the HP indicator, then the board has been failed. No Big deal, as you know it does not have a HP.
The Yellow wire from Dometic is CAPPED OFF. How did that wire get connected to the board since is did NOT have a Spade Terminal????