Dometic Penguin II A/c Heat pump installation
Hi all, well I just finished changing out the old Dometic heat pump for a new 15,000 BTU model. All went well till I powered it up. The T-stat has power and so does the unit. When it is powered up the...
Forum Discussion
All right with your help Doug I finally got it up and running. I took off the multizone module and wired it direct. I also found some installation instructions from a couple of years ago I guess. It showed the dip switches up stairs also and I found them and used the ones I need. So all is great now Thank you so much for all your help on this project. I just didn't know there was a control board upstairs.:) It all came with no instructions!
