dometic refrigerator not staying cold
I recently purchased a 1982 TT with a refrigerator which was not the original. I cannot find a part number anywhere but it is an older domestic brand 120v/12v/propane model without electronics. When...
Forum Discussion
I tried it with and without the boards in place. There are 2 now, where there was only 1 before. Right now it is a dead space on top of the box with a board on either side of it. Initially there was only 1 board on the inside, for cosmetic purposes. I then added the one on the back "flue" side. I didn't think about it picking up heat from the dead space above. Maybe some insulation laying directly on top of the box will help?
The fan I added was from the old converter/load center I replaced, unknown cfm, just hot wired to run all the time and assist. There is no insulation on the top coils, I reached up and pushed it back and can feel the top of all the piping which is warm but not hot.
The fan I added was from the old converter/load center I replaced, unknown cfm, just hot wired to run all the time and assist. There is no insulation on the top coils, I reached up and pushed it back and can feel the top of all the piping which is warm but not hot.
