AJB wrote:
I have a 2013 RM1350 that has stopped running on AC, runs fine on LP.
I checked the outlet and have power. Did a diagnostic test that is in the manual and when I do Test 3 "Turn AC heater on" I get no reading. When I do test 4 "D+ status alternator voltage" I get no reading. Everything else tests fine. Anybody have any ideas.
When you say you get "no reading" on test 3, what do you mean- you get no voltage on the heater terminals, or the display is blank? If the display is blank, check the fuse on the board. On the D+ test, the engine needs to be running to give a display of O N, and the D+ terminal needs to be hooked up (this is for the auto door lock, and not on every 1350).