Drawers won't stay shut - Argh!!
The drawers on my TT have nice side mount metal glides with ball bearings in them. They run in and out smoothly. Trouble is, when I drive down the road most of them open up and slide in and out as I ...
Forum Discussion
MEXICOWANDERER wrote:
18-8 stainless steel is not as magnetic as pure steel but you do not want pure steel. It is a fight to open the drawer unless the magnet has been sinked (too) deep and furthermore steel rusts. 18-8 does not. Trial and try to establish proper pull retention via hole depth. Two magnets one on each side of drawer or cabinet is the hot setup. If you sink two magnets and find the pull to be too weak, big-deal, sink a third magnet in the center. I do not like gizmo latches because they eventually fill up with road gunk.
Thanks for the clarification. Did not want anyone that is not familiar with stainless steel to be mistaken that any stainless would work.
