Drawing off two banks thru Switch?
I have split my 430Ah bank into two 215's, and I will soon be installing a Blue Sea switch with 1, 2, or 'both' settings. I realized last night, my cheapo 700w Walmart microwave, which is rated at 105...
Forum Discussion
Hi Roy,
With respect, a 1000 watt load on a 430 amp bank will draw far more than 80 amps.
It is moot because the OP's inverter is not large enough to run the microwave.
OP,
The load will be shared as smk said--determined by the resistance to the battery banks.
I use simple Napa switches to conjoin my battery banks and feed the inverter. That way I can shut off the dc power to the inverter.
With respect, a 1000 watt load on a 430 amp bank will draw far more than 80 amps.
It is moot because the OP's inverter is not large enough to run the microwave.
OP,
The load will be shared as smk said--determined by the resistance to the battery banks.
I use simple Napa switches to conjoin my battery banks and feed the inverter. That way I can shut off the dc power to the inverter.
