Duo-Therm Comfort Control Center 3106463.007
Did not use MH for 5 months when I switched thermostat on nothing happened no light nothing. I reset all breakers I'm aware of and checked all fuses. No change. I read that there is a reset procedure ...
Forum Discussion
a. Turn the ON/OFF switch to ON. The display light with
data should come on. If the light and data are not there,
see Section B2 Cable Assembly.
b. Depress mode to activate display light.
c. Depress the bottom two buttons (up & down) together.
d. While still holding the two buttons add the third from the
bottom (mode) , hold all three for a few seconds.
e. Release the third (mode) button.
f. Release the bottom two (up & down) together.
g. Depress the mode button. The display light should be
data should come on. If the light and data are not there,
see Section B2 Cable Assembly.
b. Depress mode to activate display light.
c. Depress the bottom two buttons (up & down) together.
d. While still holding the two buttons add the third from the
bottom (mode) , hold all three for a few seconds.
e. Release the third (mode) button.
f. Release the bottom two (up & down) together.
g. Depress the mode button. The display light should be
