E-1 Message on Dometic thermostat
My 15 btu dometic a/c has quit working. I have a message on the thermostat E-1. Need help identifying this problem. Montana is parked in the country and plugged into 50 amp. Think there was a lighting...
Forum Discussion
NO communication at the AC control Board to the wall tsat. Doug
First, reset the CCC2 using the Dometic “System Reset Procedure” (see NOTE below):
• Press OFF .
• Press ZONE and MODE at the same time. The CCC2 screen will display the “IniT” screen which
will list all the available Zones:
First, reset the CCC2 using the Dometic “System Reset Procedure” (see NOTE below):
• Press OFF .
• Press ZONE and MODE at the same time. The CCC2 screen will display the “IniT” screen which
will list all the available Zones:
