Epever 40 amp mppt delivered
Well From those that responded to my thread here, https://forums.goodsamclub.com/index.cfm/fuseaction/thread/tid/29509210.cfm I will start new for the review when I get it installed..But its go...
Forum Discussion
Im going to add a light to mine. The light will be mounted to all wood in the pass through. I dont think ill have an issue even though its a positive ground controller...
Because I cant see in the passthrough at night.
It was a warm 24f today so I went through the best of the 6 panels I have of the 280 watters.. Added another tilt stand...
Question.. 77 volts in series in 24f weather I dont think I will go over the 92 volts the controller claims as max in cold conditions? Also says 100 volt @ 77f per the controller manual...
I asked because I did not order mc4 combiners.
I didn't get to doing the controller today...
Pics are panels
panel voltage 38.7 volts
Panels in series 77 volts
Panel with me standing in front blocking the sun to one panel almost 1/2 of it.. With me shading one panel volts onlt dropped to 75.7...Volts..
Emm maybe its the current that will drop?????
Because I cant see in the passthrough at night.
It was a warm 24f today so I went through the best of the 6 panels I have of the 280 watters.. Added another tilt stand...
Question.. 77 volts in series in 24f weather I dont think I will go over the 92 volts the controller claims as max in cold conditions? Also says 100 volt @ 77f per the controller manual...
I asked because I did not order mc4 combiners.
I didn't get to doing the controller today...
Pics are panels
panel voltage 38.7 volts
Panels in series 77 volts
Panel with me standing in front blocking the sun to one panel almost 1/2 of it.. With me shading one panel volts onlt dropped to 75.7...Volts..
Emm maybe its the current that will drop?????
