Everpure head QL3 replaced..

Question

I had to replace the QL3 head, and I made a mental note.
I know, that was not a good ideal.
But replacing the new QL3, I think the input water goes
to the back of head then flows with the arrow to the
output which is into the icemaker.

Any help will be greatly appreciated.

Thanks, tenn.vol

jim-linda · Answer

Looking at the head with the turn off lever to the front, the rear fitting is the imput.

jim · Answer

Yes, the arrow indicates water flow direction.

Don't know what kind of RV you have but usually the output of the Everpure goes to a goose neck water spout next to the kitchen sink faucet. So you're only using filtered water for drinking and cooking, not dishes, wash water, or rinsing off things. And the ice maker.

After the water spout, the plastic pipe goes to a shut off valve, then onto the ice maker valve behind the refer.

tenn_vol_ · Answer

Yes, I was originally thinking I remember the output was the
input, as I was remembering the way I took it out.
But as I thought it thru the 1/4 in. line out to icemaker.

Thanks ALL for the input.

tenn.vol.

Forum Discussion

Everpure head QL3 replaced..

3 Replies

About Technical Issues

Related Content

Replacement Shower Head

Oxygenics Fury RV Handheld Shower head --COLD drip

Water Heater Replacement Recommendations

Replace insulation inside heater column.

RV shower head replacement