Yesterday I called Chad at Dinosaur Electronics to ask what he would recommend as the next step. He wanted me to send him the circuit boards and he would test them. That was not a viable option since we are now in Florida and we need the refrig to work.
When I first started this project I thought the refrig had only one circuit board. I have learned there are actually 3 circuit boards. One in the refrig eyebrow and two on the back of the refrig, On the back of the refrig the upper board is the ignitor circuit board. The board on the bottom is the power supply board. The lower board is where the 120v is connected.
Since the LP is working OK my logic tells me the ignitor board is OK. So today I decided to order the eyebrow board (Part #61647322) and power supply board (Part #618661) from Amazon. The boards will be over night delivered. Total cost was $205.
