Crap !!!!! Installing the new power supply circuit board seemed to resolve the problem. The refrig ran very nicely on ELEC for about 26 hours but then on its own it switched to LP again.
So this morning I replaced the eyebrow circuit board. This was quite easy to do. Removed three screws and that allowed the plastic piece to be removed and the circuit board was situated inside this piece. Slid the board out, reconnected to connectors and attach the three screws. 15 minutes and all done.
Yep.....refrig is running on ELEC again. Now I'll have to wait 24+ plus hours to see what the refrig decides to do. Hoping this is the final fix.
I'll hopefully only update this thread one more time to tell you GOOD NEWS.
