Forklift batteries for a solar trailer?
A few months ago, I mentioned a design for a solar trailer, which I'm gathering ideas on, and if I find a decent base for, may start with. A friend of mine has pointed me to a source of recondition...
Forum Discussion
Hi Mex,
Plate warping in tubular cells from the jolts (i.e. high demand)? Or do you mean mechanical vibration?
My favorite bank is still 800 amp hour two volt cells in series (Surrette). At 48 volts the jolts are not so bad for a 1200 watt load. Unfortunately I have a beer budget, so this may remain a dream until I win a lottery.
Is corrosion the reason for pushing air rather than sucking it?
The gasses you mention are why I don't approve of unvented battery boxes for AGM jars. They tend to be pretty deadly with even short exposure times.
Plate warping in tubular cells from the jolts (i.e. high demand)? Or do you mean mechanical vibration?
My favorite bank is still 800 amp hour two volt cells in series (Surrette). At 48 volts the jolts are not so bad for a 1200 watt load. Unfortunately I have a beer budget, so this may remain a dream until I win a lottery.
Is corrosion the reason for pushing air rather than sucking it?
The gasses you mention are why I don't approve of unvented battery boxes for AGM jars. They tend to be pretty deadly with even short exposure times.
