Fuel cutoff solenoid for Onan gensets?
For storage, I've wondered how useful it would be to have either a fuel petcock valve on the line, or if one wanted to get fancier, a solenoid activated fuel valve (so it could be turned on/off from i...
Forum Discussion
There's two trains of thought on this:
1) Run dry
2) Treat and store full
Problem is, there's always a drop or two remaining in the critical jets even when shutting down the fuel input. In my opinion, it's better to treat the fuel with stabilizer and run the equipment sufficiently to pull in stabilized fuel, then store full or run dry, but at least the fuel has been stabilized.
1) Run dry
2) Treat and store full
Problem is, there's always a drop or two remaining in the critical jets even when shutting down the fuel input. In my opinion, it's better to treat the fuel with stabilizer and run the equipment sufficiently to pull in stabilized fuel, then store full or run dry, but at least the fuel has been stabilized.
