Furnace not working (Atwood/Hydro 8531-IV)
Got a trailer that has an Atwood 8531-IV Furnace in it that has never worked. I used to get the blower motor running (No heat) but no ignition. Propane is fine - stove/oven works just fine. I b...
Forum Discussion
The electrode needs to be adjusted so that an arc ensues. The limit switch could cause no ignition. It can be bypassed for testing. All connections to/on the circuit board need to be solid and clean.
You could check that both solenoids of the gas valve are powered.
You could check that both solenoids of the gas valve are powered.
