Furnace problem
Last summer I purchased a new Viking 17FQ. Today I was going to do some work in the TT and fired up the furnace. The furnace fired up but after about one minute the burner stopped producing heat. A...
Forum Discussion
Thanks for all of the help everyone. I looked up the Suburban Service and Training Manual for my furnace. I ran through the troubleshooting section.
I removed the bug screen to make sure that it was not obstructing air flow. I removed the face cover on the inside of the TT so that I could see into the combustion chamber through the sight glass. After watching what was going on, I determined that the flame sensor or the control module has failed.
So now, it is off to the dealer to find out when they can do the warranty repair. I hope they are as nice to deal with as when I was spending my money to buy the TT.
Again, thanks everyone. I will post back when it is fixed.
Baraboo Bob
I removed the bug screen to make sure that it was not obstructing air flow. I removed the face cover on the inside of the TT so that I could see into the combustion chamber through the sight glass. After watching what was going on, I determined that the flame sensor or the control module has failed.
So now, it is off to the dealer to find out when they can do the warranty repair. I hope they are as nice to deal with as when I was spending my money to buy the TT.
Again, thanks everyone. I will post back when it is fixed.
Baraboo Bob
