furnace question
I apologize for lack of model number. I didnt write it down before coming into the woods. I'm hunting with my son this weekend & woke up this morning to no heat. The blower kicks on but the ignitors n...
Forum Discussion
It was on the gen when it failed so low voltage isnt an issue. It started & was running fine when we went to bed. Quit at some point during the night. Blower comes on & runs for 30 seconds or so before shutting down. Blower has plenty of speed & it's on the gen so if it's the sail switch it's not because it's not closing i dont think. No access panel so it has to come out to service. Do you know what ohms that switch should be to see if it's bad? I have my meter with me. Limit switch seems like best case scenario right now so i dont have to pull the unit. When/if i do pull it i'll look at that ignitor to see if it's fouled or something.
