Dutch_12078 wrote:
dougrainer wrote:
Propane tanks can be filled by weight or volume.But according to DOT regulations, propane tanks with less than 200 pounds capacity must be refilled by weight. The proper refilling procedure is detailed in the CETP handbook.
Yes, DOT says fill smaller cylinders by weight, but my preference is refillers that fill by volume using the 80% Fixed Liquid Level Gauge to determine when the cylinder is full, just as they do for the permanent ASME tanks. There's no fudging on the weight settings then.
True, but that does not make it right or legal or safe. I would lose my LP license if I get caught violating Railroad Commission regulations. There is a REASON they have these type laws/regulations. Every 3 years we have to go to 8 hour Texas LP safety Seminars to keep our individual license. You would be amazed at some of the issues that come up about filling. Doug