FW 120v ac wiring guidance
I just finished the install of a Progressive Industries EMS unit (EMS-HW50C) for our 50 Amp service FW. I also added a transfer switch for the 7KW Onan generator I am installing in the front bay. ...
Forum Discussion
smkettner wrote:
Yes and I have removed and reinserted a few multiple times on my WFCO panel without issue.
With reasonable caution you should have no problems. Strain relief is not a huge issue at this point. No one is moving, bumping, twisting, pushing on those wires once the panel is back in place.
If you are not comfortable with the adjustment then by all means just pigtail it.
I did break the strain reliefs and need to get a couple breakers with proper amp ratings 15/20 vs 15/15 and 20/20, cause these are dual circuit breakers
but now on the EMS it shows 17amp on one leg and 15 amp on the other..
