Gas water heater issue?
First of all the water heater works. It will run and heat up water but sometime during the day it will stop and I find the light on on the switch. The water will be hot and you can take a shower. It w...
Forum Discussion
Atwoods are bad about poor contact between the logic board and the edge connector that presses onto it. Sometimes you can take a dental pick and pull some springiness back into the contacts of the edge connector. Can help, too, to clean the contacts on the edge of the logic board. Pencil eraser works well. Aftermarket boards are usually less expensive (and often better, look into Dinosaur brand) than OEM ones.
