Forum Discussion

rodjburge's avatar
rodjburge
Explorer
Aug 24, 2014

GFI Reset Loaction in 1999 Holiday Rambler Endeavor

The micrwave in our 99 Endeavor quite and I have traced the problem to being a GFI reset. The problem is that the outlet for the micro is marked "GFI Protected Circuit" but does not have a reset ot test button on it. I cannot find the reset for this outlet.......help!!!

4 Replies

  • You need to look in the kitchen or bathroom for a GFI outlet. When you find one push the reset button on the face of the outlet, you have to be hooked up to shore power or to generator for it to reset. What has happened is that the microwave outlet is wired downstream from a GFI outlet so that outlet protects all the outlets beyond the GFI,
    Here is a link to what a GFI outlet looks like, there are 2 buttons on the front. GFI Outlet
  • RoyB's avatar
    RoyB
    Explorer II
    My trailer has three locations with GFCI reset receptacles
    Kitchen Sink area
    Bath room area
    Wash up sink Bedroom area


    Basically any where there is water...

    Roy Ken