Greasing EZ Lube TT axles
After having a bearing failure on my last camper when I had a shop replace and pack new bearings on my 3 year old TT I am a little skiddish about bearing failure. We sold that TT and are now in our 3r...
Forum Discussion
BB_TX wrote:Cecilt wrote:
OP here. Seems to be differences of opinion which it to be expected. I watched a video on applying new grease through the zerk on the EZ lube to push out the old grease. I think I may do this. My question is what grease and as important I would like to use a color of grease that more than likely was not used by Dexter when they packed the bearings so I can definitely tell when the old is fully out. Also, how many of the tubes will this take?
I use Mystik JT-6 Hi Temp grease. One of the greases recommended by Dexter. It is dark red in color and you can tell when it has pushed the old grey colored grease out and the red starts coming out.
Thank you. I will go with this. To be clear, using the zerk will not cause excess grease to blow out a seal or cover the brakes in grease. Appreciate all the replies.
