Ground-Neutral bond
Please help me to understand grounding and neutral bonding. This assumes the transfer switch between shore power and generator switches both hot & neutral. This is how I understand it with a big que...
Forum Discussion
Let me try to clarify: I have the factory wiring in a box with empty slots. From the Main I want to feed the A/C and the inverter/charger. All other circuits, i.e. GFI outlets, microwave will be powered from the inverter (with built-in auto transfer). I would like to house those breakers with their existing load wiring in the Main box, rather than have a sub-panel.
I realize there are very creative ways to mess up, but I was always told A-C and DC must be in separate panels, yet there they are together..straight from the factory.
*upon further review, this would not be good because the “Main” breaker would not deinergize everything in the panel. I guess I need to find room for a sub-panel.
I realize there are very creative ways to mess up, but I was always told A-C and DC must be in separate panels, yet there they are together..straight from the factory.
*upon further review, this would not be good because the “Main” breaker would not deinergize everything in the panel. I guess I need to find room for a sub-panel.
