Had to Lower My Solar Float Voltage-Update
Updated 9 July Just a note for folks in a similar situation. My usual procedure in a normal summer here with my set-up with the Eco-Worthy controller (adjustable Absorb and adjustable Float ) is...
Forum Discussion
Suppertime and we never quite got there. SG is still one brick short of a load and the Trimetric says plus 0.64AH. In the past it was saying plus 15AH when SG was at baseline.
Looks like I will need some Vabs time before going to Float, but just how to do that with the least amount of hands- on work is to be determined.
The first idea is to just set Float back to 14.5 and when the Tri says plus 15AH, check the SG and if there, twirl the panel East even if it is mid-day, and never touch that voltage settings dial again. This needs some thought.
Looks like I will need some Vabs time before going to Float, but just how to do that with the least amount of hands- on work is to be determined.
The first idea is to just set Float back to 14.5 and when the Tri says plus 15AH, check the SG and if there, twirl the panel East even if it is mid-day, and never touch that voltage settings dial again. This needs some thought.
