Hard Start for AC
Installed a Supco SPP6 hard start kit on my 2007 Coleman Mach 15000 btu AC and it didn't work, it actually did just the opposite. I overload my generator, voltage dropped to 50, not good, without the ...
Forum Discussion
The AC works just fine with shore power, never an issue, I just want to give it a little better kick start when using my generator, i connected it according to the instructions, only two wires, connected to the compressors run cap, I am installing a timed delay module for the AC fan, the compressor will engage first, the 8 to 10 seconds later the fan engages, that way they both don't start at the same time, I had the compressor checked and it is fine, running amps at 11.5 , just what it's supposed to be, I know starting amps is more, that is what I'm trying to make easier.
