Having inverter issues. (Long post)
When I bought this coach it had an inverter that was not also a transfer switch (separate charger and inverter) so there was one transfer switch that controlled the switching between shore power and g...
Forum Discussion
You are using (2) separate 120v lines from the pedestal
I think the problem is because of the 6 wire configuration instead of 4 wires
You have a current imbalance in the circuit and possibility a voltage difference between the two legs
Assuming you started with a 30 amp rig
Why don't you use a 50 amp 4 wire cord for input,
This double 30 wired into one device/ inverter charger is your problem
I think the problem is because of the 6 wire configuration instead of 4 wires
You have a current imbalance in the circuit and possibility a voltage difference between the two legs
Assuming you started with a 30 amp rig
Why don't you use a 50 amp 4 wire cord for input,
This double 30 wired into one device/ inverter charger is your problem
