Help!!! Converter Over Charging
OK you genuises, I have a PD9260C converter in my 5ver. Suddenly it decided to start charging at 14.5 volts continuously. When I first noticed it it had my Crown batteries at 112 percent. I unplugged ...
Forum Discussion
Disconnected batteries, checked water and specific gravity. One cell was a smidgen low on water, maybe 1-1.5 ounces all cells checked at 1.3 specific gravity and batteries were showing 94 percent charge status before I disconnected them. I discharged any remaining power by touching the leads as suggested and hooked them back up. We'll see in the next few hours if anything changes.
