Help: winegard pathway x1
Had this setup for a few years and has always worked well. Now it will not find a signal. I have tried a different coax cable, other TV, so the only thing left is the receiver, which I can see the “ac...
Forum Discussion
Big Katuna wrote:
If you have a voltmeter you can measure the voltage at the coax. If I remember it’s around 12 volts.
Or try a different box and cable.
What does the startup screen say?
I have tried different coax and tv. When I turn on the receiver I get the “acquiring signal” this be no more then 5 min. After about 15 min of the same screen with no green bars going across the screen I get the... I forgot exact words but the one that says no signal found, check line of sight. Make sure nothing blocking view. I have moved the winegard to 2-3 different locations with wide open view of the SW sky.
